KEY FEATURES
Modular design gives total installation flexibility to match specific customer requirements.
- Highest quality, clean, oil-free and dry compressed air
- Stops corrosion, preventing product spoilage and damage
- Compact and lightweight - half the size of conventional dryers
- Energy-efficient for maximum savings
- Easy and flexible installation
- Simple maintenance for reduced downtime
- Super quiet operation reduces noise pollution
- Dewpoints from -20°C to -70°C.
VIEW THE RANGE
The following Dryers are available:
Most computers will open PDF documents automatically, otherwise you may need to download Adobe Acrobat Reader.
Air Energy Limited
6 Fountain Drive, Hertford, Hertfordshire. SG13 7UB
FOR SALES CALL:
01992 586666
FAX:
01992 586677
FOR SERVICE CALL:
01992 586666
We have a vacancy for a qualified and experienced service engineer
more...
CompAir Desiccant Dryers
Heatless regenerative desiccant dryers
A18TX - A930TX
- Heatless Regeneration-Pressure-Swing Adsorption
- Capacity: 1,75 - 102 m³/min
- Pressure dewpoints -25˚C / -40˚C / -70˚C
- Particle removal <3 micron
- Multitronic control
- Design pressure 16 bar(ü) (A18TX - A157TX) and 10 bar(ü) (A190TX - A930TX) (higher design pressures available on request)
Adsorption Dryers A18TXA - A157TXA with activated carbon stage
Adsorption dryers of the Series A TX as unit with activated carbon stage constitute a reliable purification unit which meets extreme requirements when the compressed air must not only by dried, but also be odourless and free from oil.
- Heatless Regeneration-Pressure-Swing Adsorption
- Capacity: 1,75 - 15,67 m³/min
- Pressure dewpoints -25˚C / -40˚C / -70˚C
- Particle removal <3 micron
- Remaining oil content 0,003 mg/m³
- Multitronic control
- Design pressure 16 bar (g) (higher design pressures available on request)
Vacuum Heat-regenerative adsorption dryers A70TV - A2417TV
The A70TV - A2417TV vacuum heat-regenerative adsorption dryer range extends the availa-ble dryer capacity even further, providing optimum efficiency, reliability and a constant high-level of performance. This level of efficiency is especially reflected in proven, accurate dewpoint measurement. The constant reproduceable dewpoint is achieved using a split-bed of propriety desiccant, whilst regeneration is undertaken in a vacuum. This type of regener-ation utilising active-heating and intensive vacuum supported cooling defines the industry standard for heat-regenerative dryers.
- Heat Regeneration-Pressure-Swing Adsorption
- Capacity: 7 – 241 m³/min
- Pressure dewpoints -25˚C / -40˚C / -70˚C
- Design pressure 16 bar (g) (higher design pressures available on request)
- Design temperature (design limits). Adsorption 60°C / Regeneration 200°C. Higher temperatures on request
- Dryer memory control
- Self-cleaning wedge-wire desiccant support screen, located at the inlet of each vessel protects the desiccant against extensive moisture loading